Guinea- Bissau Flag

Nautical Polyester

100% nautical polyester 115g/m2 lock knit, washable, UV resistant, ideal for outdoor and indoor use. The print on the back side has the same quality and color intensity as the front.

Long Life

100% mesh polyester long life, 135g/m2 lock knit, washable, UV resistant, ideal for outdoor in difficult weather conditions. The print on the back has 90-95% quality and color intensity as the front.

Display

100% polyester fabric, 220g/m2, washable, UV resistant, ideal for interior or outdoor decoration and banners, non suitable for flags. Print is visible only on the front.

Pocket 6mm, open

On the left side (hoist edge), a pocket for 6mm stick, closed at the top and open at the bottom. The top, bottom, and right sides have double perimeter hems with double stitching.

T9

Pocket 6mm, closed

On the left side (hoist edge), a pocket for 6mm stick, open at the top and at the bottom. The top, bottom, and right sides have double perimeter hems with double stitching.

Pocket 10mm, closed

On the left side (hoist edge), a pocket for 10mm stick, closed at the top and open at the bottom. The top, bottom, and right sides have double perimeter hems with double stitching.

Pocket 25mm, closed

On the left side (hoist edge), a pocket for 25mm stick, closed at the top and open at the bottom. The top, bottom, and right sides have double perimeter hems with double stitching.

Strings

All the sides have double perimeter hems with double stitching.On the left (hoist edge) side two double ribbons are sewn onto the perimeter hem.

Eyelets

On the left (hoist edge) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Two sturdy eyelets made of corrosion-resistant metal are fitted at the top-left and bottom-left corners. The top, bottom, and right sides have double perimeter hems with double stitching.

D rings

On the left (hoist edge) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Two sturdy D-rings made of corrosion-resistant synthetic material are fitted at the top-left and bottom-left corners. The top, bottom, and right sides have double perimeter hems with double stitching.

Carabiners

On the left (hoist edge) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Two sturdy carabiners made of corrosion-resistant synthetic material are fitted at the top-left and bottom-left corners. The top, bottom, and right sides have double perimeter hems with double stitching.

Loop and rope

On the left (hoist edge) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. A 6mm polyester cord is inserted inside. The cord emerges at the top, forming a loop measuring approximately 30mm. At the bottom, the cord is free for approximately 40cm. The top, bottom, and right sides have double perimeter hems with double stitching.

Handy Flags x 10pcs

On the left side (hoist edge), a pocket for 6mm stick, open at the top and at the bottom. The top, bottom, and right sides are clean cut (hot cut). The flag is equipped with a 6mm stick already installed, 40cm long.

Bounting with 30 flags

30 flags clean cut on all sides are sewn on a ribbon every 13cm. The bunting is 10m long + 1 m free ribbon on both sides for the installation.

Bounting with 20 flags

20 flags clean cut on all sides are sewn on a ribbon every 13cm. The bunting is 10m long + 1 m free ribbon on both sides for the installation.

Banner

On all sides a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Sturdy eyelets made of corrosion-resistant metal are fitted on all corners.

1:1

respect ratio between height and width of 1:1.

1:2

respect ratio between height and width of 1:2.

2:3

respect ratio between height and width of 2:3.

3:4

respect ratio between height and width of 3:4.

4:5

respect ratio between height and width of 4:5.

5:7

respect ratio between height and width of 5:7.

5:8

respect ratio between height and width of 5:8.

7:10

respect ratio between height and width of 7:10.

7:11

respect ratio between height and width of 7:11.

8:11

respect ratio between height and width of 8:11.

11:18

respect ratio between height and width of 11:18.

13:15

respect ratio between height and width of 13:15.

18:25

respect ratio between height and width of 18:25.

28:37

respect ratio between height and width of 28:37.

Digital Direct Printing

Direct on fabric high resolution digital printing, with sublimatic water based disperse inks. The print is equalized on back side using eps technology and a proprietary algorithm.

Dimension {width}cm by {height}cm (width x height) {proportion_description}

{material_name}: {material_description}

{printing_name}: {printing_description}

{finishing_name}: {finishing_description}