Flag Poles

Dimensions

Material

Printing

Finishing

Dimension {width}cm by {height}cm (width x height) {proportion_description}

Printing are {width}cm by {height}cm (width x height), the flag is {total_height}cm tall when mounted on the pole.

{material_description}

{printing_description}

{finishing_description}

Nautical Polyester

100% polyester fabric, 115 g/m², made with a non-mesh knotting technique, UV-resistant, and quick-drying. Ideal for indoor and outdoor use. Machine washable. It is our best-selling fabric, offering the best value for money.

Long Life

100% polyester fabric, 120 g/m², made using a knotted weaving technique for greater strength and durability. Wind- and UV-resistant, it is ideal for outdoor use where Nautical Polyester does not provide the necessary durability. Machine washable.

Storm Flag

100% polyester fabric, 115 g/m², made using a run-resistant weaving technique and featuring distinctive reinforced holes. With a structure that is particularly resistant to wind and UV rays, it is ideal for use in windy conditions. The most durable fabric in our catalog. Machine washable.

Satin

100% polyester fabric, 125 g/m², featuring the glossy finish typical of indoor ceremonial flags. Machine washable.

Display

100% polyester fabric, 220g/m², washable, UV resistant, ideal for interior or outdoor decoration and banners, non suitable for flags. Print is visible only on the front. Machine washable.

Black, Left

The flag is carefully cut, and a black 100% polyester pole pocket is sewn onto the left side. The open edge is machine-hemmed.

Black, Right

The flag is carefully cut, and a black 100% polyester pole pocket is sewn onto the right side. The open edge is machine-hemmed.

Printed right

Printed pocket on right side

Printed left

Printed pocket on left side

Pocket 25mm, closed

On the left side (hoist), a pocket for 25mm stick, closed at the top and open at the bottom.

White, Left

The flag is carefully cut, and a white 100% polyester pole pocket is sewn onto the left side. The open edge is machine-hemmed.

White, Right

The flag is carefully cut, and a white 100% polyester pole pocket is sewn onto the left right. The open edge is machine-hemmed.

Pocket 10mm, closed

On the left side (hoist), a pocket for 10mm stick, closed at the top and open at the bottom.

Pocket 6mm, closed

On the left side (hoist), a pocket for 6mm stick, closed at the top and open at the bottom.

Pocket 6mm, open

On the left side (hoist), a pocket for 6mm stick, open at the top and open at the bottom.

Strings

On the left (hoist) side two double ribbons are sewn onto the perimeter hem.

Eyelets

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant metal are installed every 50cm. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

{count} eyelet

{count} eyelets

5cm top sleeve + eyelets

On the top side there is a 5cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant metal are sewn every 50cm. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

8cm top sleeve + eyelets

On the top side there is a 8cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant metal are sewn every 50cm. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

{count} carabiner

{count} carabiners

D rings

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are installed every 50cm. Two D-rings are sewn onto the upper and lower left corners, facing up and down. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

{count} D ring

{count} D rings

5cm top sleeve + D rings

On the top side there is a 5cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional D ring is sewn for the ballast. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

8cm top sleeve + D rings

On the top side there is a 8cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional D ring is sewn for the ballast. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

Carabiners

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are installed every 50cm. Two carabiners are sewn onto the upper and lower left corners, facing up and down. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

5cm top sleeve + carabiners

On the top side there is a 5cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional carabiner is sewn for the ballast. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

8cm top sleeve + carabiners

On the top side there is a 8cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional carabiner is sewn for the ballast. A double hem with double stitching is sewn along the open edges. All seams are sewn with high-tenacity polyester thread.

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are installed every 50cm. Two D-rings are sewn onto the upper and lower left corners, facing up and down. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are installed every 50cm. Two carabiners are sewn onto the upper and lower left corners, facing up and down. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant metal are installed every 50cm. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the top side there is a 5cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional D ring is sewn for the ballast. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the top side there is a 5cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional carabiner is sewn for the ballast. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the top side there is a 5cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant metal are sewn every 50cm. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the top side there is a 8cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional D ring is sewn for the ballast. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the top side there is a 8cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant plastic are sewn every 50cm. On the bottom left corner 1 additional carabiner is sewn for the ballast. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the top side there is a 8cm sleeve for the banner bar, open on both sides. On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. {eyelet_height} made of corrosion-resistant metal are sewn every 50cm. The open edges are clean-cut and have no seams to ensure durability and wind resistance. All seams are sewn with high-tenacity polyester thread.

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Two sturdy eyelets made of corrosion-resistant metal are fitted at the top-left and bottom-left corners.

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Two D-rings made of corrosion-resistant synthetic material are fitted at the top-left and bottom-left corners.

On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Two carabiners made of corrosion-resistant synthetic material are fitted at the top-left and bottom-left corners.

Loop and rope

On the left (hoist edge) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. In the upper left corner, a 6mm rope forms a loop; in the lower left corner, it hangs loose for about 40 cm.

Handy Flags x 10pcs

On the left side (hoist edge), a pocket for 6mm stick, open at the top and at the bottom. The top, bottom, and right sides are clean cut (hot cut). The flag is equipped with a 6mm stick already installed, 40cm long. 10pcs in a pack.

Bunting with 30 flags

30 flags clean cut on all sides are sewn on a ribbon every 13cm. The bunting is 10m long + 1 m free ribbon on both sides for the installation.

Banner

On all sides a double polyester reinforcement tape (20+20 mm) is secured with double stitching. Sturdy eyelets made of corrosion-resistant metal are fitted on all corners and every 100cm.

1:1

respect ratio between height and width of 1:1.

1:3

respect ratio between height and width of 1:3.

1:4

respect ratio between height and width of 1:4.

1:5

respect ratio between height and width of 1:5.

1:2

respect ratio between height and width of 1:2.

2:3

respect ratio between height and width of 2:3.

3:4

respect ratio between height and width of 3:4.

4:5

respect ratio between height and width of 4:5.

5:7

respect ratio between height and width of 5:7.

5:8

respect ratio between height and width of 5:8.